I set this beta test image up for James - it is setup as follows:

A = 8mb drive (the image)
B = Disk drive (or image on ADE)
C & D = DDP drives

80 column (40 column at a time - use CTRL -> and CTRL <- to swap windows.
It uses the escape sequences and control codes listed in the CP/M manual on D29 - D31

No smart keys are used or displayed

If you have an EVE or Orphanware RS232 you can use a null modem cable to plug it into a PC (or terminal) and this Beta will allow you to use the terminal instead as well as the Adam. It is setup for 4800 baud 8N1. This is the best speed I found where it doesn't loose any characters.

All printing is dumped to a parallel card if you have one - else it will not go anywhere.